/*
 * utils.h
 *
 *  Created on: 22-Jan-2024
 *      Author: saar
 */

#ifndef UTILS_UTILS_H_
#define UTILS_UTILS_H_

#include <stdlib.h>
#include <assert.h>
#include "ti_msp_dl_config.h"
//#define GPIO    0
//#define UART    0

typedef enum
{
    /* Generic error codes */
    IVEC_MCAL_STATUS_INIT_FAIL                   = -1,
    IVEC_MCAL_STATUS_SUCCESS                         ,    /*!< Generic operation success status */
    IVEC_MCAL_STATUS_ERROR                           ,    /*!< Generic operation failure status */
    IVEC_MCAL_STATUS_BUSY                            ,    /*!< Generic operation busy status */
    IVEC_MCAL_STATUS_TIMEOUT                         ,    /*!< Generic operation timeout status */
    IVEC_MCAL_STATUS_UNSUPPORTED                     ,    /*!< Generic operation unsupported status */
    IVEC_MCAL_STATUS_TRUE                            ,    /*!< Generic operation true status */
    IVEC_MCAL_STATUS_FALSE                           ,    /*!< Generic operation false status */
}IVEC_McalStatus_e;

#define GPIO     5
#define UART     1
#define HFXT     2
#define STANDBY0 3
#define SYSOSC   4
#define SLEEP0   6




volatile int i32TickCnt;


typedef enum
{
    /* Generic error codes */
    STATUS_INIT_FAIL                   =  1,
    STATUS_SUCCESS                     =  0,    /*!< Generic operation success status */
    STATUS_ERROR                       = -1,    /*!< Generic operation failure status */
    STATUS_BUSY                        =  2,    /*!< Generic operation busy status */
    STATUS_TIMEOUT                     =  3,    /*!< Generic operation timeout status */
    STATUS_UNSUPPORTED                 =  4,    /*!< Generic operation unsupported status */
}xCoreStatus_t;

typedef enum
{
    /*UART Baud Rate Options*/
    BAUD_115200                             = 0,
    BAUD_9600                               = 1,
}xUart_baud_t;

typedef enum
{
    /*CAN Baud Rate Options*/
    BAUD_500                             = 500,
    BAUD_250                             = 250,
    BAUD_150                             = 150,
    BAUD_1000                            = 1000,
    BAUD_125                             = 125,

}xCAN_baud_t;

typedef enum
{
    /*SPI Clock Speed Options*/
    CS_1Mhz                             = 0,
}xSPI_CS_t;

typedef enum
{
    /*SysTick Period Options*/
    Period_1ms =  72000,    /*!< sets period of SysTick to 1ms @48Mhz*/
}xTicks_t;

typedef enum
{
    /*SPI Clock Speed Options*/
    BAUD_100Khz                         = 0,
    BAUD_400Khz,
}xI2C_baud_t;

typedef enum {
    I2C_STATUS_IDLE = 0,
    I2C_STATUS_TX_STARTED,
    I2C_STATUS_TX_INPROGRESS,
    I2C_STATUS_TX_COMPLETE,
    I2C_STATUS_RX_STARTED,
    I2C_STATUS_RX_INPROGRESS,
    I2C_STATUS_RX_COMPLETE,
    I2C_STATUS_ERROR,
} xI2cControllerStatus_t;

void mcuInit(void);
xCoreStatus_t xMCAL_SYSCTL_INIT(uint8_t u8CLK_SRC,uint8_t u8LP_MODE);
xCoreStatus_t xMCAL_SYSTICK_INIT(xTicks_t tick);
//void delay (uint32_t us);
int i32MCAL_getTicks();
void vMCAL_DelayTicks(int i32Delay_ms);

void xMCAL_SoftReset(void);
void xMCAL_McuInit(void);
void delay (uint32_t us);
IVEC_McalStatus_e xMCAL_VrefInit(void);



#endif /* UTILS_UTILS_H_ */