/**
 * These arguments were used when this file was generated. They will be automatically applied on subsequent loads
 * via the GUI or CLI. Run CLI with '--help' for additional information on how to override these arguments.
 * @cliArgs --device "MSPM0G350X" --part "Default" --package "VQFN-48(RGZ)" --product "mspm0_sdk@2.02.00.05"
 * @v2CliArgs --device "MSPM0G3507" --package "VQFN-48(RGZ)" --product "mspm0_sdk@2.02.00.05"
 * @versions {"tool":"1.21.0+3721"}
 */

/**
 * Import the modules used in this configuration.
 */
const CAPTURE       = scripting.addModule("/ti/driverlib/CAPTURE", {}, false);
const CAPTURE1      = CAPTURE.addInstance();
const GPIO          = scripting.addModule("/ti/driverlib/GPIO", {}, false);
const GPIO1         = GPIO.addInstance();
const MCAN          = scripting.addModule("/ti/driverlib/MCAN", {}, false);
const MCAN1         = MCAN.addInstance();
const SYSCTL        = scripting.addModule("/ti/driverlib/SYSCTL");
const TIMER         = scripting.addModule("/ti/driverlib/TIMER", {}, false);
const TIMER1        = TIMER.addInstance();
const TIMER2        = TIMER.addInstance();
const UART          = scripting.addModule("/ti/driverlib/UART", {}, false);
const UART1         = UART.addInstance();
const ProjectConfig = scripting.addModule("/ti/project_config/ProjectConfig");

/**
 * Write custom configuration values to the imported modules.
 */
const mux4       = system.clockTree["EXHFMUX"];
mux4.inputSelect = "EXHFMUX_XTAL";

const mux8       = system.clockTree["HSCLKMUX"];
mux8.inputSelect = "HSCLKMUX_SYSPLL0";

const mux12       = system.clockTree["SYSPLLMUX"];
mux12.inputSelect = "zSYSPLLMUX_HFCLK";

const pinFunction3     = system.clockTree["HFCLKEXT"];
pinFunction3.inputFreq = 24;

const pinFunction4        = system.clockTree["HFXT"];
pinFunction4.inputFreq    = 24;
pinFunction4.HFXTStartup  = 10;
pinFunction4.HFCLKMonitor = true;
pinFunction4.enable       = true;

CAPTURE1.$name               = "CAPTURE_0";
CAPTURE1.ccp0PinConfig.$name = "ti_driverlib_gpio_GPIOPinGeneric4";

const Board                       = scripting.addModule("/ti/driverlib/Board", {}, false);
Board.peripheral.$assign          = "DEBUGSS";
Board.peripheral.swclkPin.$assign = "PA20";
Board.peripheral.swdioPin.$assign = "PA19";

GPIO1.$name                         = "GPIO_GRP_0";
GPIO1.port                          = "PORTB";
GPIO1.portSegment                   = "Upper";
GPIO1.associatedPins[0].$name       = "PIN_0";
GPIO1.associatedPins[0].direction   = "INPUT";
GPIO1.associatedPins[0].pin.$assign = "PB17";

MCAN1.$name                    = "MCAN0";
MCAN1.fdMode                   = false;
MCAN1.peripheral.rxPin.$assign = "PA27";
MCAN1.peripheral.txPin.$assign = "PA26";
MCAN1.txPinConfig.$name        = "ti_driverlib_gpio_GPIOPinGeneric0";
MCAN1.rxPinConfig.$name        = "ti_driverlib_gpio_GPIOPinGeneric1";

SYSCTL.forceDefaultClkConfig = true;
SYSCTL.clockTreeEn           = true;
SYSCTL.HFCLK_Freq            = 24000000;
SYSCTL.HFCLKSource           = "HFXT";
SYSCTL.validateClkStatus     = true;
SYSCTL.HFXTStartup           = 10;
SYSCTL.HFCLKMonitor          = true;
SYSCTL.CANCLKSource          = "SYSPLLCLK1";

TIMER1.$name              = "TIMER_0";
TIMER1.timerClkSrc        = "LFCLK";
TIMER1.timerClkPrescale   = 33;
TIMER1.timerMode          = "PERIODIC";
TIMER1.interrupts         = ["ZERO"];
TIMER1.timerPeriod        = "500 ms";
TIMER1.peripheral.$assign = "TIMG0";

TIMER2.$name             = "TIMER_1";
TIMER2.timerMode         = "PERIODIC";
TIMER2.interrupts        = ["ZERO"];
TIMER2.timerPeriod       = "100 ms";
TIMER2.interruptPriority = "1";
TIMER2.timerClkSrc       = "LFCLK";
TIMER2.timerClkDiv       = 3;

UART1.$name                    = "UART_0";
UART1.targetBaudRate           = 115200;
UART1.peripheral.rxPin.$assign = "PB16";
UART1.peripheral.txPin.$assign = "PB15";
UART1.txPinConfig.$name        = "ti_driverlib_gpio_GPIOPinGeneric2";
UART1.rxPinConfig.$name        = "ti_driverlib_gpio_GPIOPinGeneric3";

ProjectConfig.deviceSpin = "MSPM0G3507";

/**
 * Pinmux solution for unlocked pins/peripherals. This ensures that minor changes to the automatic solver in a future
 * version of the tool will not impact the pinmux you originally saw.  These lines can be completely deleted in order to
 * re-solve from scratch.
 */
pinFunction4.peripheral.$suggestSolution           = "SYSCTL";
pinFunction4.peripheral.hfxInPin.$suggestSolution  = "PA5";
pinFunction4.peripheral.hfxOutPin.$suggestSolution = "PA6";
CAPTURE1.peripheral.$suggestSolution               = "TIMA1";
CAPTURE1.peripheral.ccp0Pin.$suggestSolution       = "PA10";
MCAN1.peripheral.$suggestSolution                  = "CANFD0";
TIMER2.peripheral.$suggestSolution                 = "TIMA0";
UART1.peripheral.$suggestSolution                  = "UART2";