198 lines
8.3 KiB
C
198 lines
8.3 KiB
C
/*
|
|
* Copyright (c) 2023, Texas Instruments Incorporated - http://www.ti.com
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
*
|
|
* * Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* * Neither the name of Texas Instruments Incorporated nor the names of
|
|
* its contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
|
|
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
|
|
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
|
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
|
|
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
|
|
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
|
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
|
|
* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
|
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* ============ ti_msp_dl_config.h =============
|
|
* Configured MSPM0 DriverLib module declarations
|
|
*
|
|
* DO NOT EDIT - This file is generated for the MSPM0G350X
|
|
* by the SysConfig tool.
|
|
*/
|
|
#ifndef ti_msp_dl_config_h
|
|
#define ti_msp_dl_config_h
|
|
|
|
#define CONFIG_MSPM0G350X
|
|
#define CONFIG_MSPM0G3507
|
|
|
|
#if defined(__ti_version__) || defined(__TI_COMPILER_VERSION__)
|
|
#define SYSCONFIG_WEAK __attribute__((weak))
|
|
#elif defined(__IAR_SYSTEMS_ICC__)
|
|
#define SYSCONFIG_WEAK __weak
|
|
#elif defined(__GNUC__)
|
|
#define SYSCONFIG_WEAK __attribute__((weak))
|
|
#endif
|
|
|
|
#include <ti/devices/msp/msp.h>
|
|
#include <ti/driverlib/driverlib.h>
|
|
#include <ti/driverlib/m0p/dl_core.h>
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/*
|
|
* ======== SYSCFG_DL_init ========
|
|
* Perform all required MSP DL initialization
|
|
*
|
|
* This function should be called once at a point before any use of
|
|
* MSP DL.
|
|
*/
|
|
|
|
/* clang-format off */
|
|
|
|
#define POWER_STARTUP_DELAY (16)
|
|
|
|
|
|
#define GPIO_HFXT_PORT GPIOA
|
|
#define GPIO_HFXIN_PIN DL_GPIO_PIN_5
|
|
#define GPIO_HFXIN_IOMUX (IOMUX_PINCM10)
|
|
#define GPIO_HFXOUT_PIN DL_GPIO_PIN_6
|
|
#define GPIO_HFXOUT_IOMUX (IOMUX_PINCM11)
|
|
#define CPUCLK_FREQ 24000000
|
|
|
|
|
|
|
|
/* Defines for CAPTURE_0 */
|
|
#define CAPTURE_0_INST (TIMA1)
|
|
#define CAPTURE_0_INST_IRQHandler TIMA1_IRQHandler
|
|
#define CAPTURE_0_INST_INT_IRQN (TIMA1_INT_IRQn)
|
|
#define CAPTURE_0_INST_LOAD_VALUE (0U)
|
|
/* GPIO defines for channel 0 */
|
|
#define GPIO_CAPTURE_0_C0_PORT GPIOA
|
|
#define GPIO_CAPTURE_0_C0_PIN DL_GPIO_PIN_10
|
|
#define GPIO_CAPTURE_0_C0_IOMUX (IOMUX_PINCM21)
|
|
#define GPIO_CAPTURE_0_C0_IOMUX_FUNC IOMUX_PINCM21_PF_TIMA1_CCP0
|
|
|
|
/* Defines for soc: GPIOB.17 with pinCMx 43 on package pin 36 */
|
|
#define GPIO_GRP_0_soc_PIN (DL_GPIO_PIN_17)
|
|
#define GPIO_GRP_0_soc_IOMUX (IOMUX_PINCM43)
|
|
|
|
|
|
|
|
|
|
|
|
/* Defines for TIMER_0 */
|
|
#define TIMER_0_INST (TIMG0)
|
|
#define TIMER_0_INST_IRQHandler TIMG0_IRQHandler
|
|
#define TIMER_0_INST_INT_IRQN (TIMG0_INT_IRQn)
|
|
#define TIMER_0_INST_LOAD_VALUE (495U)
|
|
/* Defines for TIMER_1 */
|
|
#define TIMER_1_INST (TIMA0)
|
|
#define TIMER_1_INST_IRQHandler TIMA0_IRQHandler
|
|
#define TIMER_1_INST_INT_IRQN (TIMA0_INT_IRQn)
|
|
#define TIMER_1_INST_LOAD_VALUE (1091U)
|
|
|
|
|
|
|
|
/* Defines for UART_0 */
|
|
#define UART_0_INST UART2
|
|
#define UART_0_INST_FREQUENCY 24000000
|
|
#define UART_0_INST_IRQHandler UART2_IRQHandler
|
|
#define UART_0_INST_INT_IRQN UART2_INT_IRQn
|
|
#define GPIO_UART_0_RX_PORT GPIOB
|
|
#define GPIO_UART_0_TX_PORT GPIOB
|
|
#define GPIO_UART_0_RX_PIN DL_GPIO_PIN_16
|
|
#define GPIO_UART_0_TX_PIN DL_GPIO_PIN_15
|
|
#define GPIO_UART_0_IOMUX_RX (IOMUX_PINCM33)
|
|
#define GPIO_UART_0_IOMUX_TX (IOMUX_PINCM32)
|
|
#define GPIO_UART_0_IOMUX_RX_FUNC IOMUX_PINCM33_PF_UART2_RX
|
|
#define GPIO_UART_0_IOMUX_TX_FUNC IOMUX_PINCM32_PF_UART2_TX
|
|
#define UART_0_BAUD_RATE (115200)
|
|
#define UART_0_IBRD_24_MHZ_115200_BAUD (13)
|
|
#define UART_0_FBRD_24_MHZ_115200_BAUD (1)
|
|
|
|
|
|
|
|
|
|
|
|
/* Port definition for Pin Group GPIO_GRP_0 */
|
|
#define GPIO_GRP_0_PORT (GPIOB)
|
|
|
|
/* Defines for PIN_0: GPIOB.17 with pinCMx 43 on package pin 36 */
|
|
#define GPIO_GRP_0_PIN_0_PIN (DL_GPIO_PIN_17)
|
|
#define GPIO_GRP_0_PIN_0_IOMUX (IOMUX_PINCM43)
|
|
|
|
|
|
/* Defines for MCAN0 */
|
|
#define MCAN0_INST CANFD0
|
|
#define GPIO_MCAN0_CAN_TX_PORT GPIOA
|
|
#define GPIO_MCAN0_CAN_TX_PIN DL_GPIO_PIN_26
|
|
#define GPIO_MCAN0_IOMUX_CAN_TX (IOMUX_PINCM59)
|
|
#define GPIO_MCAN0_IOMUX_CAN_TX_FUNC IOMUX_PINCM59_PF_CANFD0_CANTX
|
|
#define GPIO_MCAN0_CAN_RX_PORT GPIOA
|
|
#define GPIO_MCAN0_CAN_RX_PIN DL_GPIO_PIN_27
|
|
#define GPIO_MCAN0_IOMUX_CAN_RX (IOMUX_PINCM60)
|
|
#define GPIO_MCAN0_IOMUX_CAN_RX_FUNC IOMUX_PINCM60_PF_CANFD0_CANRX
|
|
|
|
|
|
/* Defines for MCAN0 MCAN RAM configuration */
|
|
#define MCAN0_INST_MCAN_STD_ID_FILT_START_ADDR (0)
|
|
#define MCAN0_INST_MCAN_STD_ID_FILTER_NUM (1)
|
|
#define MCAN0_INST_MCAN_EXT_ID_FILT_START_ADDR (48)
|
|
#define MCAN0_INST_MCAN_EXT_ID_FILTER_NUM (1)
|
|
#define MCAN0_INST_MCAN_TX_BUFF_START_ADDR (148)
|
|
#define MCAN0_INST_MCAN_TX_BUFF_SIZE (2)
|
|
#define MCAN0_INST_MCAN_FIFO_1_START_ADDR (192)
|
|
#define MCAN0_INST_MCAN_FIFO_1_NUM (2)
|
|
#define MCAN0_INST_MCAN_TX_EVENT_START_ADDR (164)
|
|
#define MCAN0_INST_MCAN_TX_EVENT_SIZE (2)
|
|
#define MCAN0_INST_MCAN_EXT_ID_AND_MASK (0x1FFFFFFFU)
|
|
#define MCAN0_INST_MCAN_RX_BUFF_START_ADDR (208)
|
|
#define MCAN0_INST_MCAN_FIFO_0_START_ADDR (172)
|
|
#define MCAN0_INST_MCAN_FIFO_0_NUM (3)
|
|
|
|
|
|
|
|
|
|
/* clang-format on */
|
|
|
|
void SYSCFG_DL_init(void);
|
|
void SYSCFG_DL_initPower(void);
|
|
void SYSCFG_DL_GPIO_init(void);
|
|
void SYSCFG_DL_SYSCTL_init(void);
|
|
void SYSCFG_DL_SYSCTL_CLK_init(void);
|
|
void SYSCFG_DL_CAPTURE_0_init(void);
|
|
void SYSCFG_DL_TIMER_0_init(void);
|
|
void SYSCFG_DL_TIMER_1_init(void);
|
|
void SYSCFG_DL_UART_0_init(void);
|
|
|
|
void SYSCFG_DL_MCAN0_init(void);
|
|
|
|
bool SYSCFG_DL_saveConfiguration(void);
|
|
bool SYSCFG_DL_restoreConfiguration(void);
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* ti_msp_dl_config_h */
|