- Fixed the MCAL and ECU layers to handle multiple UART configurations.
- Updated the RTE layer to align with changes in UART layers for improved compatibility and functionality.
- Corrected the `CAN_DeInit` function to address cleanup problems during deinitialization.
- Restricted TX operations to buffer 0 only, as buffer 1 was causing transmission errors.
- Introduced two new relays for controlling Fan 1 and Fan 2.
- Updated the 9-bit status word to accommodate the new relays, expanding to 11 bits.
- Adjusted GPIO pin mapping to include the new relays in the control logic.
- Added functionality to control 9 relays based on a 9-bit status word.
- Each bit in the 9-bit word corresponds to a relay, controlling GPIO pins to turn relays ON/OFF.
- When CAN ID 0x6FF69 is received, the relay control task is triggered.
- Added macros for different PCBs: Basil, Battery Smart Basil, and Battery Swapping Station.
- Increased CPU clock frequency from 48 MHz to 72 MHz.
- Increased UART clock frequency from 24 MHz to 36 MHz.
- Update the systick period enum
- Add bootloader jump and check
- Increased the destination buffer size during rx drain
- Increased uart buffer size from 8 to 64
Rakshita
heezes