Rakshita
668462eff5
fix: Resolved specific issues with CAN deinitialization and TX buffer usage
...
- Corrected the `CAN_DeInit` function to address cleanup problems during deinitialization.
- Restricted TX operations to buffer 0 only, as buffer 1 was causing transmission errors.
2024-12-27 19:16:04 +05:30
Rakshita
d3412ccb36
fix: Correct MCAL layer issues and increase UART read timeout
...
- Resolved issues in the MCAL layer introduced during merge.
- Increased UART read timeout from 1ms to 300ms for improved data handling.
2024-12-12 17:39:27 +05:30
@rakshita4
03a449ca7f
Merge branch 'uart_Pin_Pa8&9' into uart_can_fucntional
2024-11-19 13:33:22 +05:30
@rakshita4
9999b9cfeb
Merge branch 'uart_Pin_Pa8&9' into uart_can_fucntional
2024-11-19 09:46:56 +05:30
a363d1c1f0
fix: update the ext id filter id from 25 bit to 29 bits
2024-11-18 14:12:41 +05:30
@rakshita4
5146999b44
feat(can): add default CAN speed of 500 if an invalid speed is entered
2024-11-18 14:03:45 +05:30
@rakshita4
37c087aaed
refactor(can): apply filters based on filter ID for standard or extended IDs instead of mask ID
...
Changes filter application logic to determine standard or extended filter based on the filter ID instead of the mask ID
2024-11-14 10:17:11 +05:30
@rakshita4
d722738591
feat: Add mode 3 and mode 4 for runtime CAN filter application with mask-based filtering
2024-11-13 03:53:59 +05:30
@rakshita4
3d3b39960e
feat: reject 0x500 to 0x600 CAN id
2024-11-12 16:54:07 +05:30
51cb91df6c
fix: update the CPU clock to 48Mhz
...
- Update the systick period enum
- Add bootloader jump and check
- Increased the destination buffer size during rx drain
- Increased uart buffer size from 8 to 64
2024-11-07 10:32:26 +05:30
Rakshitavecmocon
718fc19753
feat: Apply CAN filters for both standard and extended IDs - Standard ID filters: - Filter 1: Allow IDs from 100 to 200 - Filter 2: Allow IDs from 300 to 400 - Extended ID filters: - Filter 1: Allow IDs from 3000 to 3500 - Filter 2: Allow IDs from 4000 to 4500
2024-11-05 13:12:57 +05:30
Rakshitavecmocon
56c08e98b8
fix: Correct standard ID handling in CAN RX by applying proper shift
2024-11-05 00:54:43 +05:30
9631a6c398
fix: can transmission over uart
2024-11-03 20:01:20 +05:30
ed765079dd
fix: can implementation
...
- add ping reply
- can mcal implementation from socmeter
- removed the dot buffer usage in TM1650
- removed unsued variables/code
2024-10-29 19:03:30 +05:30
ab99333dad
feat: add matlab code to display soc
2024-10-29 14:42:05 +05:30
Rakshitavecmocon
bfabca4b6d
feat: Add runtime CAN baud rate change based on UART packet mode
...
- Implemented functionality to change the CAN baud rate at runtime if the received UART packet has mode set to one.
2024-10-17 16:26:33 +05:30
Rakshitavecmocon
9b2c2312cb
feat: Add runtime UART baud rate change based on received packet mode
...
Implemented functionality to change UART baud rate at runtime if the received packet has mode set to zero.
2024-10-17 13:10:51 +05:30
Rakshitavecmocon
01b847661b
fix: Correct CAN RX interrupt to handle extended IDs
2024-10-16 19:04:15 +05:30
Rakshitavecmocon
c9482f46bb
fix: Correct CAN RX interrupt to handle extended IDs and remove CAN filters
...
- Fixed the MCAL layer of CAN where RX interrupts were discarding extended IDs and only processing standard IDs.
- Removed CAN filters from the CAN configuration to allow better reception of all messages.
2024-10-15 21:15:22 +05:30
Rakshitavecmocon
9599f1630c
feat: Implement SysTick for UART reception and enhance CAN MCAL layer
...
-Replaced timer-based UART data reception with SysTick timer implementation.
- Modified the UART interrupt handler to manage interrupts effectively.
- Updated MCAL layer for CAN to ensure proper handling of FIFO in RX interrupts.
- Corrected the deinitialization function in the MCAL layer of CAN.
- Implemented a handler for managing lastErrCode in CAN interrupts.
- Removed all debug print statements and unnecessary CAN filters to clean up the code.
2024-10-15 16:10:03 +05:30
Rakshitavecmocon
5b88394f22
fix: Update clock configuration and UART/CAN settings
...
- Corrected clock configuration according to HFXT
- Set UART baud rate based on HFXT clock
- Configured CAN timing according to DL_MCAN_FCLK_HFCLK
2024-10-10 18:39:44 +05:30
Rakshitavecmocon
17131c3a34
fix: Implement error handling for CAN
2024-10-07 18:32:06 +05:30
Rakshitavecmocon
85a15dc97f
feat: Implement UART to CAN and CAN to UART communication
...
- Implemented RX and TX functionalities for UART to CAN and CAN to UART
- Updated necessary layers to support seamless communication
2024-10-04 18:51:42 +05:30
Rakshitavecmocon
c5e0c06a07
Initial commit
2024-09-26 18:52:04 +05:30
Rakshita
heezes