Tej Sharma
d3391047d6
fix: remove CAN reinit when bus goes off, add api to restore busoff error
2025-07-10 14:16:24 +05:30
Rakshita
dfdb8d0c64
feat: Parse UART data from CC and forward over CAN
...
- Implemented parsing of incoming UART data from CC and transmitting it over CAN.
- Added functionality to send received CAN data back to CC via UART.
2025-03-10 18:22:39 +05:30
Rakshita
4704529a3b
Merge branch 'stable' of https://gitea.vecmocon.com/Vecmocon_Technologies/cantouart_ti into stable
2025-02-20 17:32:01 +05:30
Rakshita
aea1dda731
refactor: Improve OTA request handling in bootloader
...
- Device will now perform a soft reset only when VECIOT is received.
- Prevents TI from booting during BMS FOTA operation.
2025-02-20 17:31:53 +05:30
Altamash
22f3173c41
feat: Add UART flash API and integrate with NFC write function .
...
-Added UART Flash API for improved NFC functionality.
-Integrated the Flash API into the NFC write function to resolve issues where NFC scans failed after 3-4 attempts.
-Ensured smooth NFC operation by addressing write-related problems.
2025-02-06 12:47:38 +05:30
Gurpal singh
20e27aeed4
fix: temporary merge of nfc with cantouart
2025-01-24 14:44:33 +05:30
Rakshita
e513e0fff1
feat: Integrate NFC functionality
2025-01-24 11:39:26 +05:30
Rakshita
071788de56
fix: Address conventions and resolve MATLAB handler default issue
...
- Corrected naming conventions across modules for consistency.
- Fixed the issue where the MATLAB code was defaulting to the handler by initializing struct variables to zero.
- Improved CAN TX function for more reliable data transmission.
2025-01-23 16:31:22 +05:30
Rakshita
49357f5d62
feat: add macros for different PCBs (Basil, Battery Smart Basil, Battery Swapping Station) and update CPU clock frequencies
...
- Added macros for different PCBs: Basil, Battery Smart Basil, and Battery Swapping Station.
- Increased CPU clock frequency from 48 MHz to 72 MHz.
- Increased UART clock frequency from 24 MHz to 36 MHz.
2024-12-02 14:21:54 +05:30
@rakshita4
5146999b44
feat(can): add default CAN speed of 500 if an invalid speed is entered
2024-11-18 14:03:45 +05:30
@rakshita4
d722738591
feat: Add mode 3 and mode 4 for runtime CAN filter application with mask-based filtering
2024-11-13 03:53:59 +05:30
Rakshitavecmocon
3896d66aa0
feat: Configure UART1 to PA8 and PA9, comment vRTE_Matlab functions, and include additional paths
2024-10-30 19:11:49 +05:30
ab99333dad
feat: add matlab code to display soc
2024-10-29 14:42:05 +05:30
Rakshitavecmocon
5b88394f22
fix: Update clock configuration and UART/CAN settings
...
- Corrected clock configuration according to HFXT
- Set UART baud rate based on HFXT clock
- Configured CAN timing according to DL_MCAN_FCLK_HFCLK
2024-10-10 18:39:44 +05:30
Rakshitavecmocon
c5e0c06a07
Initial commit
2024-09-26 18:52:04 +05:30
Tej Sharma
Rakshita
Altamash
heezes